BootROM - 1.73 Booting from NAND flash General initialization - Version: 1.0.0 Detected Device ID 6810 High speed PHY - Version: 2.0 Init RD NAS topology board SerDes lanes topology details: | Lane # | Speed | Type | -------------------------------- | 0 | 06 | SATA0 | | 1 | 05 | USB3 HOST0 | | 2 | 06 | SATA1 | | 5 | 05 | USB3 HOST1 | -------------------------------- High speed PHY - Ended Successfully DDR3 Training Sequence - Ver TIP-1.26.0 mvSysEnvGetTopologyUpdateInfo: TWSI Read failed DDR3 Training Sequence - Switching XBAR Window to FastPath Window DDR3 Training Sequence - Ended Successfully Not detected suspend to RAM indication BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01-svn48023 (Oct 13 2015 - 09:25:56) Marvell version: 2014_T3.0p6 Board: RD-NAS-88F6820-DDR3 SoC: MV88F6810 Rev A0 running 1 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 1332 [MHz] L2 @ 666 [MHz] TClock @ 250 [MHz] DDR @ 666 [MHz] DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled DRAM: 512 MiB Map: Code: 0x1fed0000:0x1ff95d60 BSS: 0x1ffef2b4 Stack: 0x1f9cff20 Heap: 0x1f9d0000:0x1fed0000 U-Boot Environment: 0x00200000:0x00280000 (NAND) NAND: 256 MiB MMC: mv_sdh: 0 *** Booting kernel from kernel 1 @0x00E00000 *** USB2.0 0: Host Mode USB3.0 0: Host Mode USB3.0 1: Host Mode Board configuration detected: Net: | port | Interface | PHY address | |--------|-----------|--------------| | egiga0 | RGMII | 0x01 | egiga0 [PRIME] Hit any key to stop autoboot: 0 NAND read: device 0 offset 0xe00000, size 0xf00000 15728640 bytes read: OK * kernel: cmdline image address = 0x02000000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.5 (rr-m@i7de) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #3 SMP Mon Jan 23 10:56:54 UTC 2017 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: Zyxel NAS326 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] percpu: Embedded 13 pages/cpu @dfbdc000 s24256 r8192 d20800 u53248 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 505744K/524288K available (7168K kernel code, 314K rwdata, 1624K rodata, 4096K init, 251K bss, 18544K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0e00000 (4096 kB) [ 0.000000] .data : 0xc0e00000 - 0xc0e4eae0 ( 315 kB) [ 0.000000] .bss : 0xc0e4eae0 - 0xc0e8da40 ( 252 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001 [ 0.000000] Switching to timer-based delay loop, resolution 40ns [ 0.000003] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns [ 0.000011] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.000229] Console: colour dummy device 80x30 [ 0.000240] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.000247] pid_max: default: 32768 minimum: 301 [ 0.000300] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000305] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000607] CPU: Testing write buffer coherency: ok [ 0.000712] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.000724] Setting up static identity map for 0x100000 - 0x100058 [ 0.000796] mvebu-soc-id: MVEBU SoC ID=0x6810, Rev=0x4 [ 0.000864] mvebu-pmsu: Initializing Power Management Service Unit [ 0.001268] Brought up 1 CPUs [ 0.001273] SMP: Total of 1 processors activated (50.00 BogoMIPS). [ 0.001277] CPU: All CPU(s) started in SVC mode. [ 0.001654] devtmpfs: initialized [ 0.003748] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.003842] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.003866] xor: measuring software checksum speed [ 0.099810] arm4regs : 2338.000 MB/sec [ 0.199709] 8regs : 1549.200 MB/sec [ 0.299609] 32regs : 1446.000 MB/sec [ 0.299613] xor: using function: arm4regs (2338.000 MB/sec) [ 0.299619] pinctrl core: initialized pinctrl subsystem [ 0.299974] NET: Registered protocol family 16 [ 0.300460] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.301032] cpuidle: using governor ladder [ 0.301065] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.301069] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.301167] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling [ 0.301173] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling [ 0.479613] raid6: int32x1 gen() 165 MB/s [ 0.649265] raid6: int32x1 xor() 188 MB/s [ 0.819231] raid6: int32x2 gen() 249 MB/s [ 0.988948] raid6: int32x2 xor() 214 MB/s [ 1.158932] raid6: int32x4 gen() 285 MB/s [ 1.328632] raid6: int32x4 xor() 215 MB/s [ 1.498615] raid6: int32x8 gen() 287 MB/s [ 1.668389] raid6: int32x8 xor() 198 MB/s [ 1.668393] raid6: using algorithm int32x8 gen() 287 MB/s [ 1.668396] raid6: .... xor() 198 MB/s, rmw enabled [ 1.668399] raid6: using intx1 recovery algorithm [ 1.669444] vgaarb: loaded [ 1.669568] SCSI subsystem initialized [ 1.669856] usbcore: registered new interface driver usbfs [ 1.669888] usbcore: registered new interface driver hub [ 1.669912] usbcore: registered new device driver usb [ 1.671462] clocksource: Switched to clocksource armada_370_xp_clocksource [ 1.678120] NET: Registered protocol family 2 [ 1.678435] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 1.678464] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 1.678502] TCP: Hash tables configured (established 4096 bind 4096) [ 1.678527] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.678541] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.678614] NET: Registered protocol family 1 [ 1.679168] RPC: Registered named UNIX socket transport module. [ 1.679173] RPC: Registered udp transport module. [ 1.679176] RPC: Registered tcp transport module. [ 1.679179] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.795065] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.795600] futex hash table entries: 256 (order: 2, 16384 bytes) [ 1.796295] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 1.796548] NFS: Registering the id_resolver key type [ 1.796562] Key type id_resolver registered [ 1.796566] Key type id_legacy registered [ 1.796574] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.796580] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.796749] fuse init (API version 7.26) [ 1.797274] async_tx: api initialized (async) [ 1.797309] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.797314] io scheduler noop registered [ 1.797317] io scheduler deadline registered [ 1.797325] io scheduler cfq registered (default) [ 1.797872] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver [ 1.798955] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00 [ 1.798964] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 1.798969] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] [ 1.798975] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.799212] PCI: bus0: Fast back to back transfers disabled [ 1.799219] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.799226] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.799284] PCI: bus1: Fast back to back transfers enabled [ 1.799344] PCI: bus2: Fast back to back transfers enabled [ 1.799365] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.799373] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.799621] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.851806] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 1.851914] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.911801] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 1.957560] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.959040] console [ttyS0] disabled [ 1.979135] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 15625000) is a 16550A [ 2.739484] console [ttyS0] enabled [ 2.743630] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 2.752715] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.762423] scsi host0: ahci-mvebu [ 2.766119] scsi host1: ahci-mvebu [ 2.769668] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41 [ 2.777625] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41 [ 2.785971] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device [ 2.794131] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda [ 2.800508] nand: Macronix MX30LF2G18AC [ 2.804366] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.811962] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048 [ 2.819127] Bad block table found at page 131008, version 0x01 [ 2.825303] Bad block table found at page 130944, version 0x01 [ 2.831314] nand_read_bbt: bad block at 0x00000e920000 [ 2.838992] 7 ofpart partitions found on MTD device pxa3xx_nand-0 [ 2.845131] Creating 7 MTD partitions on "pxa3xx_nand-0": [ 2.850544] 0x000000000000-0x000000200000 : "U-Boot" [ 2.856159] 0x000000200000-0x000000400000 : "U-Boot env" [ 2.862119] 0x000000400000-0x000000e00000 : "Config" [ 2.867700] 0x000000e00000-0x000001d00000 : "Kernel-1" [ 2.873499] 0x000001d00000-0x000008700000 : "RootFS-1" [ 2.879491] 0x000008700000-0x000009600000 : "Kernel-2" [ 2.885304] 0x000009600000-0x000010000000 : "RootFS-2" [ 2.891648] libphy: Fixed MDIO Bus: probed [ 2.895938] tun: Universal TUN/TAP device driver, 1.6 [ 2.901000] tun: (C) 1999-2004 Max Krasnyansky [ 2.907988] libphy: orion_mdio_bus: probed [ 2.915383] mvneta f1070000.ethernet eth0: Using random mac address 5a:e2:45:4a:80:c3 [ 2.923406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.929949] ehci-pci: EHCI PCI platform driver [ 2.934449] ehci-orion: EHCI orion driver [ 2.938543] orion-ehci f1058000.usb: EHCI Host Controller [ 2.943973] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 [ 2.951610] orion-ehci f1058000.usb: irq 37, io mem 0xf1058000 [ 2.981452] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 [ 2.987770] hub 1-0:1.0: USB hub found [ 2.991629] hub 1-0:1.0: 1 port detected [ 2.995959] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 3.001293] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2 [ 3.008869] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010 [ 3.017441] xhci-hcd f10f0000.usb3: irq 44, io mem 0xf10f0000 [ 3.023650] hub 2-0:1.0: USB hub found [ 3.027473] hub 2-0:1.0: 1 port detected [ 3.031597] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 3.036934] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3 [ 3.044516] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.052969] hub 3-0:1.0: USB hub found [ 3.056794] hub 3-0:1.0: 1 port detected [ 3.060945] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 3.066296] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4 [ 3.073858] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010 [ 3.082427] xhci-hcd f10f8000.usb3: irq 45, io mem 0xf10f8000 [ 3.088547] hub 4-0:1.0: USB hub found [ 3.092395] hub 4-0:1.0: 1 port detected [ 3.096491] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 3.101844] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5 [ 3.109511] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.117986] hub 5-0:1.0: USB hub found [ 3.121861] hub 5-0:1.0: 1 port detected [ 3.126067] usbcore: registered new interface driver usblp [ 3.131653] usbcore: registered new interface driver usb-storage [ 3.137947] mousedev: PS/2 mouse device common for all mice [ 3.144031] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0 [ 3.151700] i2c /dev entries driver [ 3.167001] orion_wdt: Initial timeout 171 sec [ 3.171562] md: linear personality registered for level -1 [ 3.177060] md: raid0 personality registered for level 0 [ 3.182390] md: raid1 personality registered for level 1 [ 3.187908] md: raid6 personality registered for level 6 [ 3.193248] md: raid5 personality registered for level 5 [ 3.198571] md: raid4 personality registered for level 4 [ 3.203926] device-mapper: uevent: version 1.0.3 [ 3.208760] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.219130] marvell-cesa f1090000.crypto: CESA device successfully registered [ 3.226470] usbcore: registered new interface driver usbhid [ 3.232069] usbhid: USB HID core driver [ 3.236007] Netfilter messages via NETLINK v0.30. [ 3.240725] nfnl_acct: registering with nfnetlink. [ 3.245583] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 3.251707] ctnetlink v0.93: registering with nfnetlink. [ 3.257078] nf_tables: (c) 2007-2009 Patrick McHardy [ 3.263634] nf_tables_compat: (c) 2012 Pablo Neira Ayuso [ 3.270973] xt_time: kernel timezone is -0000 [ 3.275350] ip_set: protocol 6 [ 3.278490] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.284264] gre: GRE over IPv4 demultiplexor driver [ 3.289153] ip_gre: GRE over IPv4 tunneling driver [ 3.294493] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.299859] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 3.306246] arp_tables: arp_tables: (C) 2002 David S. Miller [ 3.311974] NET: Registered protocol family 10 [ 3.317458] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.322975] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.329228] NET: Registered protocol family 17 [ 3.333722] Bridge firewalling registered [ 3.337761] 8021q: 802.1Q VLAN Support v1.8 [ 3.341979] Key type dns_resolver registered [ 3.346295] ThumbEE CPU extension supported. [ 3.350577] Registering SWP/SWPB emulation handler [ 3.355536] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.363228] v5.0-sata0: supplied by pwr_en_sata0 [ 3.367884] v12.0-sata0: supplied by pwr_en_sata0 [ 3.372795] v5.0-sata1: supplied by pwr_en_sata1 [ 3.377448] v12.0-sata1: supplied by pwr_en_sata1 [ 3.382588] ata1.00: ATA-8: TOSHIBA DT01ABA300, MZ6OABB0, max UDMA/133 [ 3.389133] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.396663] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.403616] ata1.00: configured for UDMA/133 [ 3.408159] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ABA3 ABB0 PQ: 0 ANSI: 5 [ 3.416455] armada38x-rtc f10a3800.rtc: setting system clock to 2017-01-23 11:21:35 UTC (1485170495) [ 3.425718] v5.0-sata0: disabling [ 3.429039] v12.0-sata0: disabling [ 3.432456] v5.0-sata1: disabling [ 3.435777] v12.0-sata1: disabling [ 3.439823] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.447609] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.453128] sd 0:0:0:0: [sda] Write Protect is off [ 3.457952] Warning: unable to open an initial console. [ 3.463242] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.514653] sda: sda1 sda2 sda3 [ 3.518576] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.151448] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 4.343055] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.349310] scsi host2: usb-storage 1-1:1.0 [ 5.362759] scsi 2:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 5.371862] sd 2:0:0:0: [sdb] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 5.380354] sd 2:0:0:0: [sdb] Write Protect is off [ 5.385855] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.405237] sdb: sdb1 [ 5.409980] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 10.621445] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 10.628513] ata2.00: ATA-8: Hitachi HDS721010CLA330, JP4OA3MA, max UDMA/133 [ 10.635500] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 10.643295] ata2.00: configured for UDMA/133 [ 10.647739] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72101 A3MA PQ: 0 ANSI: 5 [ 10.656342] sd 1:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 10.664250] sd 1:0:0:0: [sdc] Write Protect is off [ 10.669093] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.710617] sdc: sdc1 sdc2 sdc3 [ 10.714569] sd 1:0:0:0: [sdc] Attached SCSI removable disk [ 10.722128] Freeing unused kernel memory: 4096K (c0a00000 - c0e00000) [ 10.760660] systemd-udevd[1316]: starting version 229 [ 10.770390] random: udevadm: uninitialized urandom read (16 bytes read) [ 10.778769] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 10.786186] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 10.793845] random: udevadm: uninitialized urandom read (16 bytes read) [ 10.800510] random: udevadm: uninitialized urandom read (16 bytes read) [ 10.808814] random: udevadm: uninitialized urandom read (16 bytes read) [ 10.815689] random: udevadm: uninitialized urandom read (16 bytes read) [ 10.822556] random: udevadm: uninitialized urandom read (16 bytes read) [ 10.829384] random: udevadm: uninitialized urandom read (16 bytes read) [ 10.836242] random: udevadm: uninitialized urandom read (16 bytes read) [ 11.193965] random: fast init done [ 11.706574] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 12.020856] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFU) [ 12.039157] systemd[1]: Detected architecture arm. Welcome to Ubuntu 16.04.1 LTS! [ 12.092763] systemd[1]: Set hostname to . [ 12.213962] systemd-fstab-generator[1376]: Ignoring "nofail" for root device [ 12.566405] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 12.601599] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 12.631583] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 12.661555] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 12.701496] systemd[1]: Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems (Pre). [ 12.741490] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 12.771725] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ OK ] Started Read required files in advance. Mounting Debug File System... [ OK ] Reached target Encrypted Volumes. [ OK ] Created slice system-openvpn.slice. Starting Load Kernel Modules... [ OK ] Listening on Syslog Socket. Starting Create Static Device Nodes in /dev... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. Starting Uncomplicated firewall... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. Starting Remount Root and Kernel File Systems... [ 13.297014] EXT4-fs (sdb1): re-mounted. Opts: (null) Starting Nameserver information manager... [ OK ] Reached target User and Group Name Lookups. Starting Set console keymap... [ OK ] Listening on udev Kernel Socket. Starting Journal Service... [ OK ] Reached target Swap. [ OK ] Mounted Debug File System. [ OK ] Started Load Kernel Modules. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Uncomplicated firewall. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Set console keymap. [ OK ] Started Nameserver information manager. [ OK ] Started Journal Service. Starting Load/Save Random Seed... Starting udev Coldplug all Devices... Starting Flush Journal to Persistent Storage... Starting udev Kernel Device Manager... Starting Apply Kernel Variables... Mounting FUSE Control File System... [ OK ] Mounted FUSE Control File System. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Load/Save Random Seed. [ OK ] Started Apply Kernel Variables. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Tell Plymouth To Write Out Runtime Data... Starting netfilter persistent configuration... Starting Create Volatile Files and Directories... Starting LSB: AppArmor initialization... Starting Set console font and keymap... [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Create Volatile Files and Directories. [ OK ] Found device /dev/ttyS0. [FAILED] Failed to start netfilter persistent configuration. See 'systemctl status netfilter-persistent.service' for details. [ OK ] Started LSB: AppArmor initialization. [ OK ] Found device Hitachi_HDS721010CLA330 hitachi_1tb. [ OK ] Found device TOSHIBA_DT01ABA300 toshiba_3tb. [ OK ] Started Set console font and keymap. [ OK ] Created slice system-getty.slice. Mounting /media/toshiba_3tb... Mounting /media/hitachi_1tb... Starting Raise network interfaces... [ OK ] Started ifup for eth0. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Mounted /media/toshiba_3tb. [ OK ] Mounted /media/hitachi_1tb. [ OK ] Started Network Time Synchronization. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Trigger resolvconf update for networkd DNS. [ OK ] Reached target Paths. [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. [ OK ] Listening on UUID daemon activation socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting LSB: daemon to balance interrupts for SMP systems... Starting OpenVPN connection to ... [ OK ] Started D-Bus System Message Bus. Starting OpenVPN connection to ... [ OK ] Started Regular background program processing daemon. Starting Accounts Service... Starting System Logging Service... Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"... Starting Login Service... [ OK ] Reached target System Time Synchronized. [ OK ] Started Daily apt activities. [ OK ] Reached target Timers. [ OK ] Started System Logging Service. [ OK ] Started OpenVPN connection to . [ OK ] Started OpenVPN connection to . [ OK ] Started Accounts Service. [ OK ] Started LSB: daemon to balance interrupts for SMP systems. [ OK ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand". [ OK ] Started Login Service. Starting Permit User Sessions... [ OK ] Started Permit User Sessions. Starting LSB: start Samba SMB/CIFS daemon (smbd)... [ OK ] Started LSB: start Samba SMB/CIFS daemon (smbd). [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. Starting OpenBSD Secure Shell server... Starting OpenVPN service... Starting A high performance web server and a reverse proxy server... [ OK ] Reached target Network is Online. Starting LSB: start Samba NetBIOS nameserver (nmbd)... Starting LSB: start Samba daemons for the AD DC... Starting /etc/rc.local Compatibility... [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started OpenVPN service. [ OK ] Started /etc/rc.local Compatibility. Starting Terminate Plymouth Boot Screen... Starting Hold until boot process finishes up... [ OK ] Started Terminate Plymouth Boot Screen. [ OK ] Started Hold until boot process finishes up. [ OK ] Started A high performance web server and a reverse proxy server. Starting Set console scheme... [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started Set console scheme. [ OK ] Started LSB: start Samba daemons for the AD DC. [ OK ] Started LSB: start Samba NetBIOS nameserver (nmbd). [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. [ OK ] Started Stop ureadahead data collection 45s after completed startup. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. Ubuntu 16.04.1 LTS a380 ttyS0 a380 login: